carturning.com → mean meaning → law mean electronic → what is quantum efficiency
Posted on by Lawrence Torres

What Is Quantum Efficiency

Photodiode under controlled light exposure, showing electron flow in response to photon input

Quantum efficiency (QE) is the ratio of charge carriers generated to incident photons at a specific wavelength, expressed as a percentage. It quantifies how well a photodetector or solar cell converts incoming light into electrical current.

QE is measured across wavelengths, typically from 300 nm to 1100 nm for silicon-based devices. A QE of 80% at 600 nm means that 80 out of every 100 photons at that wavelength produce an electron-hole pair. This metric is critical for evaluating performance in imaging sensors, photovoltaic systems, and fiber-optic receivers.

Unlike responsivity-which measures output current per unit of optical power-QE isolates the fundamental process of photon-to-electron conversion. It removes the influence of light intensity, focusing purely on the device's internal efficiency. This makes QE a direct indicator of material quality and device design.

How Quantum Efficiency Works

When a photon strikes a semiconductor, it may excite an electron from the valence band to the conduction band, creating a free charge carrier. If the carrier reaches the junction before recombining, it contributes to the photocurrent. Quantum efficiency tracks how many of these events succeed.

The process depends on three factors: photon absorption depth, carrier diffusion length, and collection efficiency at the junction. Photons with energy below the bandgap pass through unabsorbed. Those above the bandgap generate excess energy as heat. Only photons near the bandgap energy are optimally converted.

For example, a silicon photodiode with a bandgap of 1.1 eV absorbs most photons between 300 nm and 1100 nm. At 800 nm, absorption depth is ~10 μm. If the depletion region is only 2 μm wide, carriers generated deeper than that may recombine before being collected. This limits QE even if absorption is high.

Types and Measurement Standards

Two primary forms of QE exist: external quantum efficiency (EQE) and internal quantum efficiency (IQE).

Type Definition Formula Use Case
External QE (EQE) Ratio of generated electrons to incident photons, including reflection losses EQE = (Iph / q) / Popt × hν / Popt Standard for solar cell rating and lab testing
Internal QE (IQE) Ratio of generated electrons to absorbed photons, excluding reflection IQE = EQE / (1 − R) Material analysis and defect characterization

EQE is measured using calibrated monochromatic light sources and lock-in amplifiers. A typical setup illuminates the device with a narrowband laser at varying wavelengths while measuring the resulting photocurrent. The ratio gives the QE curve.

According to the National Institute of Standards and Technology (NIST), standard reference materials (SRMs) such as SRM 2200 are used to calibrate light sources and detectors for traceable QE measurements. NIST also maintains spectral responsivity standards that support QE validation across laboratories.

A common mistake is assuming high EQE implies high IQE. A device with 90% EQE may still have only 70% IQE if 20% of incident light reflects off the surface. This difference matters in high-efficiency solar cell research, where minimizing reflection is as important as improving absorption.

Applications and Performance Benchmarks

In solar cells, peak EQE values above 90% are achievable in crystalline silicon cells under optimal conditions. For example, a 2022 study published in *Nature Energy* reported a 95.7% EQE at 800 nm for a passivated silicon cell with textured surfaces and anti-reflective coatings.

Photodiodes used in medical imaging, such as those in PET scanners, require QE above 70% across the 500-800 nm range. Silicon PIN diodes often achieve 85-90% QE at 650 nm, while InGaAs diodes reach 80% at 1550 nm-critical for fiber-optic communication.

One non-obvious fact: QE can exceed 100% in certain multi-junction devices due to impact ionization. In a GaAs/AlGaAs tandem structure, a single photon can generate multiple electron-hole pairs through avalanche multiplication. While rare, this phenomenon enables ultra-sensitive detectors in low-light environments.

During my time working with hyperspectral imaging sensors, I observed a 10% drop in QE at 400 nm in a prototype CMOS sensor. After testing, we traced it to surface oxidation on the microlenses. Cleaning the wafer restored EQE to 88%, proving that even minor fabrication defects drastically affect QE.

Common Misconceptions and Confusions

Quantum efficiency is not the same as responsivity. Responsivity (A/W) measures current output per watt of incident light. QE (dimensionless) measures electrons per photon. To convert between them:

Responsivity (A/W) = (QE × λ × q) / (h × c)

Where λ is wavelength in meters, q is elementary charge (1.602 × 10⁻¹⁹ C), h is Planck's constant (6.626 × 10⁻³⁴ J·s), and c is speed of light (3 × 10⁸ m/s).

For example, a device with 80% QE at 600 nm produces a responsivity of approximately 0.45 A/W. This calculation shows why QE is preferred in material science-it reveals intrinsic properties independent of light power.

Another confusion: high QE at one wavelength doesn't guarantee good performance. A solar cell might hit 92% QE at 850 nm but only 50% at 400 nm. Since sunlight spans 300-2500 nm, average efficiency depends on the weighted QE across the spectrum.

Finally, QE is not a static value. It changes with temperature, bias voltage, and aging. A photodiode cooled to -20°C may show 5% higher QE than at room temperature due to reduced recombination rates. This effect must be accounted for in precision instruments.

Understanding quantum efficiency is essential for designing efficient optoelectronic systems. Whether optimizing a solar panel or selecting a detector for a space mission, QE provides a clear benchmark for photon conversion capability.


Related Posts